how to install fabric hurricane shutters

Installing fabric hurricane shutters is an important step in protecting your home during a hurricane or severe storm. These shutters are designed to help prevent debris and wind from causing damage to your windows and doors. Here’s a step-by-step guide on how to install fabric hurricane shutters:

Materials You’ll Need:

  • Fabric hurricane shutters
  • Mounting brackets or anchors (usually included with the shutters)
  • Screwdriver or drill
  • Screws or bolts (appropriate for the mounting surface)
  • Measuring tape
  • Pencil
  • Ladder or scaffolding (if needed)
  • Safety goggles and gloves


  1. Safety Precautions:
    • Prioritize safety. Make sure you have the necessary safety equipment, including safety goggles and gloves. Use a sturdy ladder or scaffolding if you need to access higher areas.
  2. Inspect the Shutters:
    • Before installation, inspect the fabric hurricane shutters to ensure they are in good condition and free of any damage. If you find any issues, repair or replace them as needed.
  3. Determine the Mounting Locations:
    • Decide where you want to install the fabric hurricane shutters. Typically, they cover windows and doors that are vulnerable to wind and debris during a storm. Measure the dimensions of the openings to determine the size of the shutters you need.
  4. Mark the Mounting Points:
    • Use a pencil to mark the locations where you’ll attach the mounting brackets or anchors. These should be evenly spaced around the perimeter of the opening, with a distance recommended by the manufacturer or based on your local building codes.
  5. Install Mounting Brackets or Anchors:
    • Attach the mounting brackets or anchors to the marked locations using the appropriate screws or bolts. Ensure they are securely fastened to the wall or window frame. If your home has a concrete block or stucco exterior, you may need special anchors for a secure attachment.
  6. Attach the Shutters:
    • Carefully place the fabric hurricane shutters into the mounted brackets or anchors. Some shutters have hooks or tabs that fit into the brackets, while others use straps or fasteners. Follow the manufacturer’s instructions for your specific shutters to attach them securely.
  7. Tighten and Secure:
    • Ensure that the shutters are tight and secure in the mounting brackets. Double-check each attachment point to make sure the shutters won’t come loose during a storm.
  8. Test the Shutters:
    • Test the shutters by simulating strong winds or pressure against them to ensure they can withstand the force of a storm. Make any necessary adjustments to the attachments if needed.
  9. Label or Identify Shutters:
    • To make it easier to install the shutters quickly in the event of a storm, label or mark each shutter with its corresponding location (e.g., “Living Room Window,” “Front Door”). This will help you install them correctly under stressful conditions.
  10. Maintenance and Inspections:
    • Regularly inspect your fabric hurricane shutters for any signs of wear, damage, or corrosion. Replace any damaged components promptly to ensure their effectiveness during future storms.

Properly installed and maintained fabric hurricane shutters can provide significant protection for your home during hurricanes and severe storms. It’s important to install them well in advance of any potential storm to ensure they are in place and ready to use when needed.

Also Read:

Related Articles

Leave a Reply

Back to top button