Installing a kegerator under a counter is a great way to have draft beer on tap in your home or bar. Here’s a step-by-step guide on how to install a kegerator under the counter:
Materials You’ll Need:
- Kegerator
- CO2 tank
- Beer lines
- Gas lines
- Faucet(s)
- Drip tray
- Draft tower or shank (if not included with the kegerator)
- Wrenches and adjustable wrench
- Drill and hole saw (if necessary)
- Screws
- Shims (if needed to level the kegerator)
Step 1: Choose the Location
- Select a suitable location under the counter for your kegerator. Ensure there is enough space for the kegerator’s dimensions and that it’s easily accessible for maintenance and refilling.
Step 2: Prepare the Counter
- Measure and mark the location where the draft tower or shank will go through the counter. Use a hole saw to create an opening for the draft tower or shank if necessary.
Step 3: Position the Kegerator
- Carefully slide the kegerator into its designated space under the counter. Make sure it’s level and stable.
Step 4: Connect the CO2 Tank
- Attach the CO2 tank to the regulator on the back of the kegerator. Tighten the connection with an adjustable wrench, but avoid over-tightening.
Step 5: Install the Draft Tower or Shank
- If your kegerator came with a draft tower, position it through the hole you prepared in the counter. Secure it in place using the included mounting hardware.
- If your kegerator does not have a draft tower and uses a shank, install the shank through the counter hole, securing it with a flange and screws on the top side of the counter.
Step 6: Connect the Beer and Gas Lines
- Attach one end of the beer line to the keg coupler and the other end to the faucet(s).
- Connect the gas line to the CO2 tank and the other end to the keg coupler.
Step 7: Test the System
- Open the CO2 tank valve and set the pressure to the desired level (typically around 12-14 PSI).
- Check for any gas leaks by applying a soapy water solution to the connections and looking for bubbles. Tighten any connections as needed.
- Pull a test pint to ensure that beer is flowing properly. Adjust the pressure and temperature settings as necessary for your beer type.
Step 8: Position the Drip Tray
- Install the drip tray under the faucet(s) to catch any spills or drips. Secure it to the counter or wall using screws or brackets if needed.
Step 9: Final Adjustments
- Ensure the kegerator is level and stable. Use shims if necessary to level it.
- Double-check all connections and make sure the kegerator is functioning correctly.
Step 10: Stock the Kegerator
- Load your kegerator with kegs of your favorite beer and start enjoying your draft beer on tap.
Remember to follow the specific instructions provided with your kegerator, as installation steps and requirements can vary by brand and model. Additionally, regularly clean and maintain your kegerator to ensure it operates efficiently and dispenses great-tasting bee
Also Read:
https://infusionpost.com/how-to-inject-meat-without-an-injector/
https://infusionpost.com/how-to-inject-mosquito-spray-in-sprinkler-system/
https://infusionpost.com/how-to-install-deb-in-fedora/
